Super Jet Black Quart URETHANE BASECOAT CLEARCOAT Car Auto Paint Kit

You are looking at A Complete Auto Paint Kit that will give you the High Quality Finish! What you will receive it this urethane base coat clear coat kit is.

1 - Quart of Super Jet Black premium urethane base coat(APPBC SERIES). 1 - Quart of Medium Urethane Reducer (APPURI 70-G). 1 - Quart of extra high gloss urethane clear coat (APP150). 1 - Half Pint of Urethane Hardener (APP151). 3 - EA Quality 190 Micron Nylon Automotive Strainers. 3 - EA Wood Paint Mixing Sticks. 1 - Quart mixing cup. APPBC (Auto Paint Pro Base Coat), Series Urethane Base coat APPBC - Series Urethane Base coat is a quick dry, good hiding, factory pack line of many popular colors.

Various OEM colors are available. Ideal for overalls, large blend area repairs, or for ground-coat material. For a complete and current list of colors offered, please visit Auto Paint Pro Online. For dry sanding, a final sanding step of P500-P600 grit is recommended using a maximum 100 grit step difference or less throughout the taken sanding steps.

For wet sanding, a final sanding step of P800-P1000 grit is recommended using a maximum of 200 grit step difference or less throughout the sanding steps. Clean area with a good grade wax and grease remover and wipe dry with a clean cloth. Wipe area with tack cloth to remove any dust or dirt particles.

Mixing Directions 1 Part APPBC - Series Base coat 1 Part APPUR - Series Universal Reducer Spray Gun Set-up Spray Gun: Fluid tip: Application pressure: Gravity feed 1.3-1.5mm 30 PSI at the spray gun air inlet Gravity feed HVLP 1.3-1.5mm 10 PSI max at air cap Siphon feed 1.6-1.8mm 40-50 PSI Application Apply 2 - 4 single coats or until full coverage is achieved. Allow each coat to flash off for approximately 5 to 10 minutes at 70°F. Prior to clear coat application, allow a minimum of 20minutes flash time at 70°F and a maximum of 24 hours flash time at 70°F. Should this maximum time be exceeded, scuff surface and apply another coat.

Can be catalyzed up to 10% of unreduced color portion with a base coat hardener or another isocyanate hardener. Clean equipment with lacquer thinner.