Torch Red CHEVY 9075 Quart URETHANE BASECOAT CLEARCOAT Car Auto Paint Kit

Torch Red CHEVY 9075 Quart URETHANE BASECOAT CLEARCOAT Car Auto Paint Kit
Torch Red CHEVY 9075 Quart URETHANE BASECOAT CLEARCOAT Car Auto Paint Kit
Torch Red CHEVY 9075 Quart URETHANE BASECOAT CLEARCOAT Car Auto Paint Kit
Torch Red CHEVY 9075 Quart URETHANE BASECOAT CLEARCOAT Car Auto Paint Kit
Torch Red CHEVY 9075 Quart URETHANE BASECOAT CLEARCOAT Car Auto Paint Kit
Torch Red CHEVY 9075 Quart URETHANE BASECOAT CLEARCOAT Car Auto Paint Kit

Torch Red CHEVY 9075 Quart URETHANE BASECOAT CLEARCOAT Car Auto Paint Kit
A Complete Auto Paint Kit that will give you the High Quality Finish! What you will receive it this urethane base coat clear coat kit is. 1 - Quart of CHEVY 9075 Torch Red premium urethane base coat(APPBC SERIES). 1 - Quart of Medium Urethane Reducer (APPURI 70-G). 1 - Quart of extra high gloss urethane clear coat (APP150). 1 - Half Pint of Urethane Hardener (APP151). 3 - EA Quality 190 Micron Nylon Automotive Strainers. 3 - EA Wood Paint Mixing Sticks. APPBC (Auto Paint Pro Base Coat), Series Urethane Base coat APPBC - Series Urethane Base coat is a quick dry, good hiding, factory pack line of many popular colors. Various OEM colors are available. Ideal for overalls, large blend area repairs, or for ground-coat material. For a complete and current list of colors offered, please visit Auto Paint Pro Online. For dry sanding, a final sanding step of P500-P600 grit is recommended using a maximum 100 grit step difference or less throughout the taken sanding steps. For wet sanding, a final sanding step of P800-P1000 grit is recommended using a maximum of 200 grit step difference or less throughout the sanding steps. Clean area with a good grade wax and grease remover and wipe dry with a clean cloth. Wipe area with tack cloth to remove any dust or dirt particles. Mixing Directions 1 Part APPBC - Series Base coat 1 Part APPUR - Series Universal Reducer Spray Gun Set-up Spray Gun: Fluid tip: Application pressure: Gravity feed 1.3-1.5mm 30 PSI at the spray gun air inlet Gravity feed HVLP 1.3-1.5mm 10 PSI max at air cap Siphon feed 1.6-1.8mm 40-50 PSI Application Apply 2 - 4 single coats or until full coverage is achieved. Allow each coat to flash off for approximately 5 to 10 minutes at 70°F. Prior to clear coat application, allow a minimum of 20minutes flash time at 70°F and a maximum of 24 hours flash time at 70°F. Should this maximum time be exceeded, scuff surface and apply another coat.

Can be catalyzed up to 10% of unreduced color portion with a base coat hardener or another isocyanate hardener. Clean equipment with lacquer thinner. This item is in the category "eBay Motors\Automotive Tools & Supplies\Auto Paints & Supplies\Automotive Paint Kits". The seller is "autopaintpro" and is located in this country: US.

This item can be shipped to United States, Canada.


Torch Red CHEVY 9075 Quart URETHANE BASECOAT CLEARCOAT Car Auto Paint Kit